We stock new shot blast equipment. Automatic shot blast equipment is also called wheel blast or centrifugal blasting. It is the best choice when overall surface blast cleaning/preparation is required. Shot blasting is commonly used in industries that can be used for: Cleaning steel and non-ferrous parts, forgings and castings, preparing surfaces to be painted or coated, removing rust or scale from oxidized metal, shot peening
Part Number: KA67-Y1.5-4P-90.04-M1-III-A-CCW of gearbox, its ratio is 1 : 90.04
VFD ready, was a spare for a conveyor. It is bran new never used.
The model code KA67-Y1.5-4P-90.04-M1-III-A-CCW describes a specific helical-bevel gearmotor configuration, likely following the nomenclature of manufacturers like SEW-Eurodrive or similar industrial brands.
Model Breakdown
KA67: The gear unit series and size. K denotes a helical-bevel (right-angle) gearbox, A typically indicates a hollow shaft design, and 67 is the frame size.
Y1.5: Specifies the motor power, which is 1.5 kW (approximately 2 HP).
4P: Indicates a 4-pole motor, which typically runs at a nominal speed of 1400–1800 RPM depending on the frequency (50/60 Hz).
90.04: The exact reduction ratio of the gearbox (1:90.04). This means for every 90.04 rotations of the motor, the gearbox output shaft rotates once.
M1: The mounting position, defining how the unit is oriented in space (usually horizontal, feet down).
III: Often refers to the terminal box position on the motor (Position 3).
A: Typically refers to the output shaft or flange variant (e.g., hollow shaft with keyway).
CCW: Specifies the Counter-Clockwise direction of rotation for the output shaft.
Performance Specifications
Type: Helical-Bevel (Right-Angle).
Efficiency: High efficiency (typically >90%) in both directions of rotation.
Typical Applications: Conveyors, material handling, and industrial machinery where space is limited and a 90-degree turn is required.
